Some BUELL Motorcycle Manuals PDF are above the page - 1125, Firebolt, Lightning, XB9r, XB12. Buell Motorcycle is a subsidiary of Harley-Davidson Corporation, and is, in fact, a subsidiary whose specialization is the production of exclusive sports bikes. Get Free Buell Xb9r Service Manual Buell Xb9r Service Manual If you ally habit such a referred buell xb9r service manual ebook that will present you worth, acquire the unquestionably best seller from us currently from several preferred authors. If you desire to hilarious books, lots of novels, tale, jokes,.

• Buell 2003XB9S Service Manual 588 pages Summary of Contents for Buell XB9S 2003 Page 1 Engine oil and transmission fluid levels. Always clean around lines or covers before they are removed.
• Buell 2008 xb electronics diagnostics manual. Buell XB 2008 workshop manual. 2008 1125R electronics diagnostics manual. Buell 2009 1125 manual workshop manual. Buell 2009 1125 Electrics workshop manual. Buell 2009 1125 Parts catalog. Buell 2009 1125 Owners manual.
• Here you will find links to all things Buell!!! Web forums, Manuals, Service Bulletins, Tunes, Helpful Tech links, etc. Have a look around and if you know of any other helpful links not listed here, please let us know by using the contact page.

These Mounting instructions where made on a 2006 XB12 Ulysses. For removing the original exhaust on your Buell XB we recommand to see your original work shop manual

What’s in the box that we send,

look down at the picture, these are all the parts that are in the box.

Before you start mounting the exhaust, you need to mount the left Chin spoiler bracket,

look up to see how it looks like, and look down to see how it is mounted.

Remove the side stand, and put the Chin spoiler bracket in between the side stand and engine

Put the bolts back in and use red lockite 272 on the threaths and tighen theme to 25-27 ft/lbs ( 34-37 NM )

Prepare the exhaust for mounting.

Slip the connecting pipe in the exhaust , slide the mounting bracket on the pipe, and screw in the 2 M8 bolts with lock washers , do not tighten theme fully.

Buell Xb Service Manual

Slip the exhaust pipe clamp on

Mount the front exhaust hanger on the mounting point, and put the bolt true , do not tighten this bolt yet

Mount the exhaust on the bike, sliding the connecting pipe over the header,

And mount the 2 x bolts M6 in the mounting bracket, do not tighten them fully.

Buell Xb 12

Make sure the exhaust is horizontal under the bike, if not rotate the exhaust to adjust this

Put the rear mouting staps over the rear exhaust bracket

And screw in the 2 M6 long bolts, to hold the exhaust,

check again if the alignment off the exhaust is good, and tighten the rear exhaust straps to 10 Nm.

Now tighten the front mounting brackets.

now mount the right Chin spoiler bracket

Mount back the Idler pulley, yes this is a different one then original (-:

Mount the support bracket first, do not tighten the nut and bolt completely

tighten the M8 bolts to 25NM

tighten the M6 bolt to 10 Nm

And place the Right spoiler bracket in front

Connect the two brackets

And tighten the front exhaust mount bolt

Tighten the rear idler pulley nuts to 33-35 ft/lbs ( 45-47 Nm )

Tighten the front exhaust mounting bolt to 25 Nm ( M8 )

Tighten the M6 bolt connecting the brackets to 10Nm

Tighten the exhaust clamp.

And mount the chin spoiler back, using the original bolts and the lock nuts delivered with the exhaust ( 36-48 In/Lbs , 4 -5 Nm )

Mount the two front chin spoiler bolts with a lock nut , to fix them to getter

Check the space between the rear exhaust straps and the idler pulley, and give the rear straps a little dent

with the back off a hammer to give the idler pulley some more play.

Mount the rear axle back torque the axle to 45-52 ft/Lbs (65-70 Nm ) , back the axle of 2 turns, and tighten the axle again to 45-52 ft/Lbs (65-70 Nm )

Tighten the rear axle pinch bolt to 40-45 ft/Lbs ( 54-61Nm )

Buell Xb Handlebars

It should look like this when mounted without spoiler:

Buell Xb Manual Transmission

Make the necessary changes to your fuel system to get the most from your exhaust choice

We made for ALL BUELL XB models all years a 200% fitting fuel map. Please order when ordering the exhaust

or contact us how to get it inside your ECM.

Your new exhaust can smell a little after the first few rides, this is normal

Buell Xb Repair Manual

Drive safe