The EUMIG P8 m uses a low voltage lamp and gives exceedingly bright illumination – in the same way as a car headlamp. EUMIG was the first firm to use this principle in 8 mm. Projectors, and it has proved it value a thousand times over. Eumig p8 - dual. Hello Hope someone with equipment knowledge can help me out with this one. I have an opportunity to pick up a Eumig P8 Automatic Novo Dual Voltage projector for cheap. In spite of its small size, the EUMIG P8 m can take 400 ft. Spools without having to be mounted on a special base. The EUMIG P8 m is simple and almost foolproof.
Eumig Mark S 810 D High Quality Sound Projector
A dual gauge sound projector. Plays Super8/Single8 and standard8.
Lens: Vario Eupronet 1,3/15-30 mm.May also be equipped with some other Eupronet zoom lens.
Halogen lamp 12 V/100 W type EFP
Eumig P8 Dual Manual Transmission
Sound: mono ( record&playback ), fade in / fade out, sound-on-sound, mixing from external source ( microphone 0,3-150 mV, 22 kΩ; line in 50 mV - 3 V, 1 MΩ )
Eumig P8 Dual Manual Download
Amplifier 15W, option for external amplifier ( line out 0,5-1,5 V, 50 kΩ )
Internal loudspeaker
Option for external loudspeaker ( 4 - 8 Ω, 10W )
Auto threading
Forward/backward projection
Speeds: 18 fps and 24 fps
Reel capacity: 180m/600ft
Weight appx. ???
Accessories: Universal reel; 8mm to super8 stepper for the front arm spindle; microphone; 6 m reel of magnetic striped film; film head trimmer/clipper.
Eumig P8 Dual Manual 2017
Optional accessories: Eumig Serie 600 Daylight Viewer; Eumig LS-800 loudspeaker; Universal re-recording lead ( a cord + four adapters ).
Comments[edit]
Changing between standard8 and S-type film formats requires changing the gate assembly and sprocket wheel set. If You are considering to buy this projector You should check that both sets are present. The second set of sprocket wheels is stored on the inner side of the removable front panel and the additional gate assembly is in a horizontal slot in the body, also under the front panel. When changing the gate assembly, the knob at the rear of the projector should be manually turned to position where the red dot is up.